Learn to Check Guitar Nut Slot Depth + Super Glue Baking Soda

To measure proper nut slot depth? Cut a pencil in half so one side is flat Lay it on the frets w the lead facing the nut Run it over the

Learn to Check Guitar Nut Slot Depth + Super Glue Baking Soda The Zero Glide nuts come in a range of sizes for acoustics and electrics so it was pretty simple to find the correct nut for my application Tools: Basic hand

To measure proper nut slot depth? Cut a pencil in half so one side is flat Lay it on the frets w the lead facing the nut Run it over the

slot deno Sand all 6 sides starting with 80 grit and finishing with 220 grit paper Mark the height of the fret wire to determine slot depth Mark the top edge of the nut

nut from the base to the slots for the high E and low E I tend to I usually use a thin saw to cut a slot the required depth (of

nut slot height The depth can simply be done with the nut in place and using a 012 feeler gauge or a 12 string as a feeler gauge to measure the gap between

If the nut is at its ideal height, you should see a very tiny space between the string and the first fret: How much space? Well, it varies with need, but